SAVE 10% ON SPARE PARTS*

OFFER ENDS IN

Select Manufacturer

Results Found for


image1
Universal Acetoxy Transparent Silicone

Article Number: M-5506

Universal Acetoxy Transparent Silicone

Does not crack, shrink; very durable, stays elastic at all times. Does not lose its function at very high and very low temperatures. Adheres strongly to common construction materials (steel, faience tile glass, ceramics, painted wood, polyester, etc). Cures fast. Within hours following the application it reaches to water-tight form. Has 20% moving capability and thus can be used at moving joints. Has resistance against UV rays, weather conditions and abrasion. It can be used both indoors and outdoors by this means.

Colour: Transparent
Curing: Single Component Acetoxy
Density: 1,03 gr/ cm3
Tack-Free Time: 10 minutes
Drying: 3 mm / day

₦ 3,500.00

Quantity:

image1
Jellock Anaerobic Orange Gasket Maker

Article Number: M-3330

Jellock Anaerobic Orange Gasket Maker

This product is used especially; automative, ship, aircraft industry, all metal flanges and the other requirements. Fills the capillary cracks on the gasket surfaces, deformations and voids. Creates a smooth surface. It is a superior engineering seal with thermal tolerance to - 55 °C / + 200 °C in narrow gasket areas up to 0.25 mm.

Colour: Bright orange
Packing Type: 50 ml. Tüp
Product Code: M-3330
Pieces: 12
Odour: Acrylate, characteristic

₦ 6,100.00

Quantity:

image1
Antrasil Automatic Dose RTV Black Liquid Gasket Maker

Article Number: M-3321

Antrasil Automatic Dose RTV Black Liquid Gasket Maker

Neutral oxym based rising generation gasket maker. After curing, it doesn't give off odour that affects the sensors bad. Resists shrinking and cracking caused by exposure of thermal cycling. After curing, it works between -40 °C and +300 °C. Improved resistance particularly greased and dirty surfaces. After curing, it resists to oil, antifreeze, petrol, diesel and sea water. Can be demounted. Strong adherence, hiding power, constant elasticity, ekstra sealing. Pure silicone, does not contain any organic extender.

Product Code: M-3321
Packaging Type: 200 ml. Aluminium Cartridge
Pieces: 12
Colour: black
Density: 1,05 gr / cm3

₦ 8,000.00

Quantity:

image1
Antrasil Neutral Grey Liquid Gasket Maker

Article Number: M-3325

Antrasil Neutral Grey Liquid Gasket Maker

Neutral oxym based rising generation gasket maker. After curing, it doesn't give off odour that affects the sensors bad. Resists shrinking and cracking caused by exposure of thermal cycling. After curing, it works between -40 °C and +300 °C. Improved resistance particularly greased and dirty surfaces. After curing, it resists to oil, antifreeze, petrol, diesel and sea water. Can be demounted. Strong adherence, hiding power, constant elasticity, ekstra sealing. Pure silicone, does not contain any organic extender.

Product Code: M-3325
Packaging Type: 90gr Tüp
Pieces: 12
Colour: Grey
Density: 1,05 gr / cm3

₦ 4,000.00

Quantity:

image1
Antrasil Automatic Dose RTV Grey Liquid Gasket Maker

Article Number: M-3323

Antrasil Automatic Dose RTV Grey Liquid Gasket Maker

Neutral oxym based rising generation gasket maker. After curing, it doesn't give off odour that affects the sensors bad. Resists shrinking and cracking caused by exposure of thermal cycling. After curing, it works between -40 °C and +300 °C. Improved resistance particularly greased and dirty surfaces. After curing, it resists to oil, antifreeze, petrol, diesel and sea water. Can be demounted. Strong adherence, hiding power, constant elasticity, ekstra sealing. Pure silicone, does not contain any organic extender.

Product Code: M-3323
Packaging Type: 200 ml. Aluminium Cartridge
Pieces: 12
Colour: Grey
Density: 1,05 gr / cm3

₦ 8,000.00

Quantity:

image1
Antrasil Neutral Red Liquid Gasket Maker

Article Number: M-3324

Antrasil Neutral Red Liquid Gasket Maker

Neutral oxym based rising generation gasket maker. After curing, it doesn't give off odour that affects the sensors bad. Resists shrinking and cracking caused by exposure of thermal cycling. After curing, it works between -40 °C and +300 °C. Improved resistance particularly greased and dirty surfaces. After curing, it resists to oil, antifreeze, petrol, diesel and sea water. Can be demounted. Strong adherence, hiding power, constant elasticity, ekstra sealing. Pure silicone, does not contain any organic extender.

Product Code: M-3324
Packaging Type: 90gr Tüp
Pieces: 12
Colour: Red
Density: 1,05 gr / cm3

₦ 4,000.00

Quantity:

image1
Jal-Alcon-S Syringe 5 Minutes Epoxy

Article Number: M-2310

Jal-Alcon-S Syringe 5 Minutes Epoxy

Fast drying, general purpose, epoxy based, metallic bonding and filling material. Freezes in 5 minutes, sticks in 20 minutes and ready to use after 1 hour.

Product Code: M-2310
Packaging Type: 30 gr. Blister
Pieces: 12
Colour: Gray after mixing
Heat Resistance: High heat resistance +120°C (Temporarily +160°C)

₦ 4,500.00

Quantity:

image1
Epoxy Transparent Super Bond Syringe Mix

Article Number: M-2313

Product Code: M-2313
Packaging Type: Blister

₦ 5,700.00

Quantity:

image1
Jal-Alcon-S 5 Minutes Epoxy

Article Number: M-2210

Jal-Alcon-S 5 Minutes Epoxy

Fast drying, general purpose, epoxy based, metallic bonding and filling material. Freezes in 5 minutes, sticks in 20 minutes and ready to use after 1 hour.

Product Code: M-2210
Pieces: 24
Packaging Type: 20 gr. Box
Colour: Gray after mixing
Heat Resistance: High heat resistance +120°C (Temporarily +160°C)

₦ 2,700.00

Quantity:

image1
Rapid Plastic Steel 5 Minutes Epoxy Syringe Transparent

Article Number: M-2204

Rapid Plastic Steel 5 Minutes Epoxy Syringe Transparent

Fast pastes. Fast drying, general purpose, epoxy based bonding and filling material. Hardens in 5 minutes, glues in 20 minutes, ready to use after 1 hour.

Product Code: M-2204
Packaging Type: 30 gr. Blister
Pieces: 12
Colour: Transparent

₦ 5,000.00

Quantity: